Skip to content

Weitendorf gas compression station

Facts and Figures
Company Baugesellschaft m.b.H. Erhard Mörtl
Principal OMV TAG Working Group
Location Weitendorf - Austria
Type Pipeline construction
Runtime 07.2008 - 10.2009

Capacity extension with new compression station.

Natural gas from Russia reaches Austria via the Trans-Austria Gas Pipeline System and is transported from here to Italy, Slovenia and Croatia. Two new compressor stations were built to carry the growing demand for energy markets and to increase the capacity of the gas line. On behalf of the company Ghizzoni, PORR implemented the civil engineering work for the new gas compressor station in Weitendorf bei Graz.

The works started with large-area earthworks in July 2008. Extensive parts of the floor had to be replaced and filled with lean concrete under the foundation due to bad geological conditions; cable ducts and pipelines also had to be excavated. After completion of earthworks and the refilling of the excavation and pipe trenches, the access and feeder roads were built and the terrain secured with gravel or asphalt surface. The gas pipes and castings were laid and welded by the Italian project partner

Technical data.

  • 40,000m³ excavated material
  • 12,000m² asphalt
  • 600m³ concrete foundations
  • 12,000m² humus surface
  • 13,000m² gravel surface
  • 6,900m cable protection tube
  • 900m water pipeline
  • 900m³ concrete
  • 20,000m³ bulk mass
  • 980 running metres fence length
  • 1,000 running metres fire extinguisher pipeline
  • 320m bored pipe wall
  • 1,500m channels DN150–300
  • 4 bridges